Friedrich Heat Pump 40-Gallon (PROH40 T0 FD120-MSO)

Friedrich Heat Pump 40-Gallon (PROH40 T0 FD120-MSO) is a heat pump (hybrid electric) water heater from Friedrich with a 36 gallon rated tank and a 45 gallon first-hour rating at a 2.8 UEF.

Efficiency
Uniform Energy Factor (UEF) 2.8
Annual electricity use 780 kWh/yr
Recovery efficiency 387 %
General
Fuel Electric
Capacity
First-hour rating 45 gal
Rated storage volume 36 gal
Draw pattern Low
Heat pump
Heat pump type 120 Volt Integrated HPWH
Refrigerant (GWP) R-134a (GWP:1430)
Compressor low-temp cutoff 210 °F
Installation
Input voltage 120
Max current draw 4.5 A
Smart features
Smart / connected capable No
Dimensions
Height 45.5 in
Diameter 16 in
Certification
ENERGY STAR certified Yes

Who is the Friedrich Heat Pump 40-Gallon (PROH40 T0 FD120-MSO) for?

Similar water heaters

Frequently asked questions

Is the Friedrich Heat Pump 40-Gallon (PROH40 T0 FD120-MSO) ENERGY STAR certified?

Yes, the Friedrich Heat Pump 40-Gallon (PROH40 T0 FD120-MSO) holds a current ENERGY STAR certification for water heating efficiency (UEF 2.8).

How much does the Friedrich Heat Pump 40-Gallon (PROH40 T0 FD120-MSO) cost to run per year?

About $133 per year at national average energy rates, based on its certified annual energy use under the DOE test draw pattern. Your rate and usage change this figure.

What electrical circuit does the Friedrich Heat Pump 40-Gallon (PROH40 T0 FD120-MSO) need?

The Friedrich Heat Pump 40-Gallon (PROH40 T0 FD120-MSO) runs on a 120 V circuit drawing up to 4.5 A — many installations use an existing outlet with no new wiring.

Is the Friedrich Heat Pump 40-Gallon (PROH40 T0 FD120-MSO) a smart water heater?

No, the Friedrich Heat Pump 40-Gallon (PROH40 T0 FD120-MSO) is not connected-capable — it has no app connectivity or demand-response support.

Sources