GE Profile Heat Pump 40-Gallon (PF40S10FPY01)
GE Profile Heat Pump 40-Gallon (PF40S10FPY01) is a heat pump (hybrid electric) water heater from GE Profile with a 40 gallon rated tank and a 46 gallon first-hour rating at a 3.1 UEF.
| Uniform Energy Factor (UEF) | 3.1 |
|---|---|
| Annual electricity use | 724 kWh/yr |
| Recovery efficiency | 397 % |
| Fuel | Electric |
|---|
| First-hour rating | 46 gal |
|---|---|
| Rated storage volume | 40 gal |
| Draw pattern | Low |
| Heat pump type | 120 Volt Integrated HPWH |
|---|---|
| Refrigerant (GWP) | R1234YF |
| Compressor low-temp cutoff | 35 °F |
| Input voltage | 120 |
|---|---|
| Max current draw | 7.5 A |
| Smart / connected capable | Yes |
|---|
| Height | 39.4 in |
|---|---|
| Diameter | 18.5 in |
| ENERGY STAR certified | Yes |
|---|
Who is the GE Profile Heat Pump 40-Gallon (PF40S10FPY01) for?
- Its 46 gallon first-hour rating suits a household of 1–2 people under DOE sizing guidance.
- Estimated running cost: about $123/year at the national average electricity rate (724 kWh/yr certified use).
- Runs on a 120 V circuit (up to 7.5 A) — often no new wiring needed.
- The heat pump compressor operates down to 35 °F ambient — below that, backup elements take over.
Similar water heaters
- Friedrich Heat Pump 40-Gallon (PROH40 T2 FD400-15) (UEF 3.45)
- Rheem Heat Pump 40-Gallon (PROPH40 T2 RH375-15) (UEF 3.45)
- Rheem Heat Pump 40-Gallon (PROPH40 T2 RH400-15) (UEF 3.45)
- Rheem Heat Pump 40-Gallon (XE40T10H22U0) (UEF 3.45)
- Rheem Heat Pump 40-Gallon (XE40T10H22U1) (UEF 3.45)
- Richmond Heat Pump 40-Gallon (10E40-HP515) (UEF 3.45)
Frequently asked questions
Is the GE Profile Heat Pump 40-Gallon (PF40S10FPY01) ENERGY STAR certified?
Yes, the GE Profile Heat Pump 40-Gallon (PF40S10FPY01) holds a current ENERGY STAR certification for water heating efficiency (UEF 3.1).
How much does the GE Profile Heat Pump 40-Gallon (PF40S10FPY01) cost to run per year?
About $123 per year at national average energy rates, based on its certified annual energy use under the DOE test draw pattern. Your rate and usage change this figure.
What electrical circuit does the GE Profile Heat Pump 40-Gallon (PF40S10FPY01) need?
The GE Profile Heat Pump 40-Gallon (PF40S10FPY01) runs on a 120 V circuit drawing up to 7.5 A — many installations use an existing outlet with no new wiring.
Is the GE Profile Heat Pump 40-Gallon (PF40S10FPY01) a smart water heater?
Yes, the GE Profile Heat Pump 40-Gallon (PF40S10FPY01) is connected-capable, with app control and eligibility for most utility demand-response programs.
Sources
- data.energystar.gov (retrieved 2026-07-17)