GE Profile Heat Pump 80-Gallon (PH80S10BNY01)

GE Profile Heat Pump 80-Gallon (PH80S10BNY01) is a heat pump (hybrid electric) water heater from GE Profile with a 80 gallon rated tank and a 101 gallon first-hour rating at a 4.5 UEF.

Efficiency
Uniform Energy Factor (UEF) 4.5
Annual electricity use 1102 kWh/yr
Recovery efficiency 494 %
General
Fuel Electric
Capacity
First-hour rating 101 gal
Rated storage volume 80 gal
Draw pattern High
Heat pump
Heat pump type 240 Volt Integrated HPWH
Refrigerant (GWP) R1234YF
Compressor low-temp cutoff 35 °F
Installation
Input voltage 240
Max current draw 23 A
Smart features
Smart / connected capable Yes
Dimensions
Height 57.2 in
Diameter 21.5 in
Certification
ENERGY STAR certified Yes

Who is the GE Profile Heat Pump 80-Gallon (PH80S10BNY01) for?

Compare the GE Profile Heat Pump 80-Gallon (PH80S10BNY01)

Similar water heaters

Frequently asked questions

Is the GE Profile Heat Pump 80-Gallon (PH80S10BNY01) ENERGY STAR certified?

Yes, the GE Profile Heat Pump 80-Gallon (PH80S10BNY01) holds a current ENERGY STAR certification for water heating efficiency (UEF 4.5).

How much does the GE Profile Heat Pump 80-Gallon (PH80S10BNY01) cost to run per year?

About $187 per year at national average energy rates, based on its certified annual energy use under the DOE test draw pattern. Your rate and usage change this figure.

What electrical circuit does the GE Profile Heat Pump 80-Gallon (PH80S10BNY01) need?

The GE Profile Heat Pump 80-Gallon (PH80S10BNY01) runs on a 240 V circuit drawing up to 23 A; per the NEC 125% continuous-load rule plan for at least a 30 A breaker (check the installation manual for the required circuit).

Is the GE Profile Heat Pump 80-Gallon (PH80S10BNY01) a smart water heater?

Yes, the GE Profile Heat Pump 80-Gallon (PH80S10BNY01) is connected-capable, with app control and eligibility for most utility demand-response programs.

Sources