Friedrich Heat Pump 80-Gallon (PROH80 T2 FD400-15)

Friedrich Heat Pump 80-Gallon (PROH80 T2 FD400-15) is a heat pump (hybrid electric) water heater from Friedrich with a 72 gallon rated tank and a 67 gallon first-hour rating at a 3.7 UEF.

Efficiency
Uniform Energy Factor (UEF) 3.7
Annual electricity use 871 kWh/yr
Recovery efficiency 445 %
General
Fuel Electric
Capacity
First-hour rating 67 gal
Rated storage volume 72 gal
Draw pattern Medium
Heat pump
Heat pump type 240 Volt Integrated HPWH
Refrigerant (GWP) R-134a (GWP:1430)
Compressor low-temp cutoff 37 °F
Installation
Input voltage 240
Max current draw 12 A
Smart features
Smart / connected capable No
Dimensions
Height 74.2 in
Diameter 24.3 in
Certification
ENERGY STAR certified Yes

Who is the Friedrich Heat Pump 80-Gallon (PROH80 T2 FD400-15) for?

Similar water heaters

Frequently asked questions

Is the Friedrich Heat Pump 80-Gallon (PROH80 T2 FD400-15) ENERGY STAR certified?

Yes, the Friedrich Heat Pump 80-Gallon (PROH80 T2 FD400-15) holds a current ENERGY STAR certification for water heating efficiency (UEF 3.7).

How much does the Friedrich Heat Pump 80-Gallon (PROH80 T2 FD400-15) cost to run per year?

About $148 per year at national average energy rates, based on its certified annual energy use under the DOE test draw pattern. Your rate and usage change this figure.

What electrical circuit does the Friedrich Heat Pump 80-Gallon (PROH80 T2 FD400-15) need?

The Friedrich Heat Pump 80-Gallon (PROH80 T2 FD400-15) runs on a 240 V circuit drawing up to 12 A; per the NEC 125% continuous-load rule plan for at least a 15 A breaker (check the installation manual for the required circuit).

Is the Friedrich Heat Pump 80-Gallon (PROH80 T2 FD400-15) a smart water heater?

No, the Friedrich Heat Pump 80-Gallon (PROH80 T2 FD400-15) is not connected-capable — it has no app connectivity or demand-response support.

Sources